Introduction of Fibreglass Water Tank
Fibreglass water tank as a whole by high quality SMC water tank board assembled. It is characterized by the use of food-grade resin, so the water quality is good, clean and pollution-free, the product has high strength, light weight, corrosion resistance, beautiful appearance, long service life, convenient maintenance and management characteristics.
The performance characteristics of Fibreglass water tank
Fibreglass water tank has the characteristics of light weight, no rust, no penetration, good water quality, wide range of application, long service life, good thermal insulation performance, beautiful appearance, convenient installation, convenient maintenance, strong adaptability and so on. The structural design of Fibreglass water tank is determined by the structural strength and stiffness of the disk to determine the size of the structure. The macroplan is aesthetically pleasing, easy to move, and easy to assemble and disassemble. Compared to steel and concrete water tanks, the plate structure is used for spherical growth. He has his own character and creativity. Although Fibreglass tanks were larger than feng shui tanks in the early days, they could be used endlessly due to their light weight, ease of installation, and ease of cleaning.
The insulation performance of Fibreglass water tank
Fibreglass water tank insulation layer commonly used several collocation
- 5cm rubber foam + aluminum foil insulation
- Glass steel plate +5cm foam board insulation
- Polyurethane foam board + color steel insulation
- Grey sponge insulation
When it comes to who has the best insulation, most people will go with polyurethane. Fiberglass water tank principle is fiberglass as the surface layer, polyurethane foam and other inner core layer, through the optimization of the combination, so that the inner and outer layer together to achieve the best thermal insulation effect, thermal insulation time limit, temperature within 24 hours within 5 degrees.
Common problems during the installation of Fibreglass water tank
- Need to install switching power supply and check the sealing with cold water;
- Before installing the water tank, in accordance with the requirements of the stainless steel water tank instructions to find the installation support bar;
- Avoid using fire on the edge of the water storage tank. If electric welding is needed, safety management measures must be taken to prevent sparks from splashing on the water storage tank plate, so as not to cause danger;
- Can not store the water tank around the accumulation of large and medium-sized dirt, to ensure that there is enough space around the stainless steel water tank to check the safety regularly;
- Can not use hard objects to hit the water tank or hit the top of the water tank;
- No matter how the tonnage of the water tank must be placed on the wall of the load beam;
- Water storage tank press need not be less than or higher than the generator set is equipped, it is best to say that the generator set is equipped with the same level surface;
- The inlet and outlet of the water storage tank must use vulcanized rubber around the street to prevent water pipe expansion;
- Stainless steel water tank is placed on the surface of the level, there can be no water storage condition;
- The location of the storage tank should be clean and tidy to prevent air pollutants from entering the storage tank.
Usage in different industries
Water storage facilities for public use
FRP assembled water tank as drinking water tank procurement raw materials need to use food-grade resin, with food-grade resin to make the water tank is completely can be used as drinking water pool. Many food factories use FRP products, used for food brewing, fermentation, refrigeration, freezing, starch production, drinking water production and other fields; Especially in the food processing process containing acid, alkali, salt and other corrosive ingredients, FRP is an ideal substitute for stainless steel. Fiberglass also has the outstanding advantage of low investment cost, only half of the cost of stainless steel. And the water tank that still has a lot of glass steel to do now, use at fresh sea, aquatic product transport reach store up, also explain can serve as living drinking water pool completely.
Water storage equipment use as fire water
As everybody knows, all have a process of early fire, fire fire practice proves that the fire blazes early, is very important to avoid bigger fire, glass fiber reinforced plastic water tank, water storage, on the one hand, make the fire water pipe filled with water, save time full of pipes after fire pump open, won the time to rush toward fire. On the other hand, the pressurization and pressure stabilizing system and water tank installed on the roof can ensure the enriched water column of the fire gun, which plays a decisive role in the success or failure of the initial fire fighting.
Use as industrial water storage equipment
Glass reinforced plastic assembled water tank is an indispensable part of public water supply system in public mining enterprises and civil houses. 85% of water tank water supply system, because of water tank bacteria and algae, rust pollution and can not meet the water quality standards. FRP FRP water tank to solve the concrete water tank weight, easy leakage, easy to grow moss and steel plate water tank easy corrosion, rust off the water quality pollution problems, is currently the international popular new water tank, is also the largest production of FRP industry a product, gradually replaced the traditional material water tank occupy the market.
Inquiry please contact.
Email ✉: cn@chinaestop.cn
Whatsapp✆:+86 15350598856
Web: www.chinaestop.cn
——————————————————————————
“ Wish to be your best partner in China! Welcome to visit our company ”
[wpforms id=”522″]