Fire water tanks Galvanized are mainly stamped from high-quality galvanized steel sheets, formed into standard plates such as 1000×1000,
1000×500, 500×500, and then hot-dip galvanized to form galvanized water tank plates. The prefabricated hot-dip galvanized water tank is
a new type of water tank manufactured in accordance with 92SS177. The manufacture and installation of this product are not affected by civil
construction, and no welding equipment is required. The surface is treated with hot-dip galvanized anti-corrosion, which is beautiful and durable,
and prevents secondary pollution of water quality, which is beneficial The human body is healthy, and meets the requirements of standardization,
serialization and factoryization of building products.
Features
- The surface adopts hot zinc anticorrosion treatment, which has good corrosion resistance, beautiful appearance, convenient
installtion, and can be assembled for the second time after dismantling. - Full bolt connection, on-site assembly, quick and convenient assembly, special non-toxic sealing strips are used for sealing
during assembly, and there will be no water leakage and loose sealing. - The special tie rod structure in the water tank makes the mechanical performance more reasonable, and the height can reach
5 meters. The galvanized water tank has no special requirements on the installation site, and no lifting equipment is required.
Installation and acceptance of fire water tank galvanized
- When installing, leave an inspection channel of no less than 700mm between the box and the wall, and the top and bottom of the
box should not be less than 500mm. - Make the buttresses first during civil construction, and the joints between the surrounding water tank and the unit plates at the bottom
of the tank should be located on the buttresses. - After assembly, open and close the outlet pipe and drain pipe, open the inlet pipe, and check until it is full of water while draining the water.
It is qualified if there is no leakage for 24 hours. Introduction of the assembled galvanized steel water tank. The q235 steel plate of the
assembled galvanized steel water tank is stamped to form standard plates of 1000×1000mm and 1000×500mm. The perimeter is drilled,
galvanized, and assembled on site. The standard plates are sealed with medical silicone gaskets. ,Bolted. The wholesale manufacturer of
galvanized water tanks for fire-fighting galvanized water tanks. The basic requirements for wholesale galvanized water tanks for fire-fighting:
The geometric dimensions of the concrete foundation should be formulated in accordance with the relevant regulations of GB02S101.
Fire water tank galvanized cleaning steps cleaning steps
- First, close the water inlet valve of the galvanized water tank and open the drain hole plug (or valve) to drain the remaining
water in the water tank; - The water tank with climbing ladder can climb into the water tank along the ladder, and the water tank without climbing ladder
can use 2 bamboo ladders (moderate height) to be placed inside and outside the water tank respectively, and you can enter the
water tank along the bamboo ladder under protection; - Use a clean mop or rag to clean the periphery and bottom of the galvanized water tank. If the bottom is serious, it can be
scrubbed with a soft towel and detergent; - Open the water inlet valve, put in an appropriate amount of clean water to rinse the wall and bottom of the barrel, so that the
dirt can be drained from the sewage outlet. If necessary, repeat it for several times until you are satisfied; Fill up with water and
the cleaning work is over.
Inquiry please contact.
Email ✉: cn@chinaestop.cn
Whatsapp✆:+86 15350598856
Web: www.chinaestop.cn
——————————————————————————
“ Wish to be your best partner in China! Welcome to visit our company ”
[wpforms id=”522″]