FRP grating machine introduction
Introduction
FRP grating machine is used for making different kinds of FRP(fiberglass reinforce plastic) molded gratings, commonly used size include H25, H30, H38 ,and also can make customized dimensions according to request.
It main contains 3 parts: grating mold, heating system, accessory equipment. Each grating mold include mold cavity and ejector pin de-molding system , The grating size can be adjusted by change the mold size.
The important features are include easy operation , low maintenance, less weight( easy to transport and installation), high resistance capacity, so make it durable.
The mold block made by S45C steel, and the top plate use material of S45C with thickness 14mm,and other support steel structure with steel grade Q235C, the block dimension tolerance will be control within +-0.1mm.
Grating mold details
The mold is small metal which made by S45C steel, and adopt chromium plating method. As a important part of the machine, it has advantage of smooth surface, high hardness an lone serve life.
Heating system details
It has water cycle heating and water cycle cooling system, FRP grating use thermosetting resin, the resin become solidified with the temperature increase.
Advantage of FRP grating machine
- High mechanical strength of joint
- High load bearing capacity
- Install easily
- Anti-corrosive long time
- Low maintenance cost
- Easy to maintenance
- Lest weight (3.5T-4.5T)
- Easy operation
- Labor request less
- Heat fast
Produce Dimension of FRP Grating
Mesh Size: 38*38mm、50*50mm
Mesh Height: 25mm、 30mm 、38mm、 50mm、 65mm
Panel Size(Width x Length): 1220*3660mm、1220*2440mm 、1220*4000mm 、1000*4000mm
Most sell grating mold size and specification
The component of FRP grating machine
Key component
- Ejector pin
- Mould blocks
- Hydraulic Pump
- Copper water pipe
Auxiliary equipment of FRP moloed grating machine
- Resin Mixer/Resin mixing bath
- Yarn creel
- Hydraulic Pump
- Water-circulating pump
- Mixer bucket
- Cooling Tower
- Boiler
- Grinding machine
Characteristics of molded of FRP grating machine
- Ejector rod lifting device is two cylinder to parallel advance, smooth, no waving.
- Stripping plate and stripping beam adopt elasticity connection, go up and down is parallel and steady.
- The module using delicate S45C steel, grinding, polishing and the surface is plating.It has antiseptic function,smooth and easy to demould.
- Ejector rod can go up and down along with lifting device, easy to change and easy maintenance.
- Ejector rod is made from steel parts grinding, surface smooth, firmness and wear resistance.
- Hydraulic station adopt hydraulic parts made by Sino-Japanese joint venture, it is long-life and durable
- Mould temperature rise and drop are achieved by rectangular copper pipe, which have large contact area with template, temperature rise and drop fast, and it can heat the mould top surface. In terms of the four borders of the mould,it is anti-corrosion and durable.Joint adopt stainless soft joint,joint destuffing is convenience,anti-corrosion and durable.
- hot and cold water injection use high-powered water pump ,pipe connections in parallel,so the heating and cooling speed are both fast.
- there is protective equipment on the mould to avoid the resin leakage.
- The mould adpot the screw on the bottom to lockup,it is easy to adjust and change.
How to buy this machine from He Bei XSY co.,ltd.
Confirm the dimension details, quote price , sign contract, make payment – arrange production – delivery goods- customer receive and install
Incoterms (Price Terms)You Should Know
Before commencing with global buying and shipping in large orders, we recommend you to get acquainted with Incoterms (International Commerce Terms). Simply put, these are rules set by the International Chamber of Commerce (ICC), involving certain selling terms used globally. These are the terms agreed upon by both buyers and sellers during any international transactions.
The Incoterm you agree upon will determine whether you or your seller are legally subjected to certain costs and risks when your goods are in transit. There are several different Incoterms, but usually being familiar with the following four is enough for China imports:
EXW – Ex-Works or Ex-Warehouse
Shipping under EXW makes it the supplier’s responsibility only to get the goods ready for dispatch. From then on, the freight forwarder is responsible for receiving the assets and make sure they are cleared, loaded onto the cargo vessel, and delivered to their final destination.
FOB – Free on Board
With FOB, the supplier has to get your goods aboard the vessel. Once the goods are loaded, the supplier is no more responsible for them. The freight forwarder should handle them thereupon, until delivery.
CIF – Cost, Insurance, and Freight
When shipping under CIF, the seller loads the goods on the vessel, upon which the risk of any loss or damage passes, just like in FOB. Additionally, in CIF, the seller covers all freight costs until the goods arrive at your destination port. The seller also has to insure the goods to cover the risk of damage during carriage.
Shipping Methods We Can Choose
By Sea
Shipping by sea (Full containers)
Shipping by sea (Less than containers)
Shipping by sea (Bulk vessel)
By Air
By Courier
Such as DHL/EMS/TNT/FEDEX/UPS etc.
If you plan to import FRP grating machine, Contact Us Now!
Inquiry please contact.
Email ✉: cn@chinaestop.cn
Whatsapp✆:+86 15350598856
Web: www.chinaestop.cn
——————————————————————————
“ Wish to be your best partner in China! Welcome to visit our company ”
[wpforms id=”522″]