FRP Grating Anti-slip Properties DIN 51130 Standards

FRP Grating Anti-slip Properties DIN 51130 Standards

FRP grating is often used in industrial and commercial applications due to its durability, corrosion resistance, and anti-slip properties. The anti-slip standards for FRP grating are crucial for ensuring safety in environments where slipping hazards are a concern.

One of the key standards for anti-slip properties is DIN 51130. This German standard specifies the testing method for determining the anti-slip properties of flooring materials, including FRP grating, under conditions where there is a risk of slipping due to contamination by lubricants such as oils or greases.

Key Points of DIN 51130:

Testing Method:

– The standard involves testing the flooring material on an inclined plane.

– The test surface is contaminated with a lubricant (e.g., engine oil), and the angle of inclination is gradually increased until a test person wearing standard safety shoes begins to slip.

– The angle at which slipping occurs is recorded and used to classify the material’s anti-slip properties.

Classification:

DIN 51130 classifies anti-slip properties into different “R” grades (R9 to R13), with higher numbers indicating better anti-slip performance.

R9: Low anti-slip properties (suitable for dry conditions or light contamination).

R10: Moderate anti-slip properties.

R11: Good anti-slip properties.

R12: Very good anti-slip properties.

R13: Excellent anti-slip properties (suitable for heavily contaminated or oily environments).

Application:

FRP grating designed to meet DIN 51130 standards is often used in areas where slip resistance is critical, such as industrial walkways, platforms, stair treads, and areas exposed to oils or chemicals.

Surface Finish of FRP Gratings:

The anti-slip properties of FRP grating are often enhanced by modifying the surface finish, such as adding grit or texture to the top layer.

Sand Grit FRP Grating : The surface is covered with a layer of quartz sand, the best anti-slip performance, suitable for wet or greasy environment.

Concave FRP Grating: The surface is fluted structure, providing medium anti-slip performance, suitable for general industrial environment.

Smooth FRP Grating: smooth surface, poor anti-slip performance, only suitable for dry environment or special purposes.

Importance of Compliance:

Compliance with DIN 51130 ensures that FRP grating provides adequate slip resistance, reducing the risk of workplace accidents.

It is essential to select the appropriate R rating based on the specific application and environmental conditions.

If you are specifying or purchasing FRP grating, ensure that it meets the required DIN 51130 standard for your application to guarantee safety and performance.