The foundation type for a GRP/FRP (Glass Reinforced Plastic / Fiberglass Reinforced Plastic) water tank is critical to ensure long-term stability, prevent structural damage, and maintain watertight integrity. Since GRP water tanks are prefabricated and assembled on-site from modular panels, the foundation must be precisely designed to support the full weight of the tank and water, while remaining level and durable.
Cement Foundation Drawing from GOOYI Water Tank
Notes: Each customer order from Xingtai GOOYI, we will provide full set of installation drawing after sending goods.
we will 100% support customer installation works, till to it successful install at site.
Here are the common foundation types used for GRP/FRP panel water tanks:
✅ 1. Reinforced Concrete Slab Foundation (Most Common)
- Description: A flat, solid, reinforced concrete base poured on-site.
- Thickness: Typically 100–200 mm (4–8 inches), depending on tank size and load.
- Requirements:
- Must be perfectly level (±3 mm tolerance over 1 m²).
- Smooth surface, free of sharp edges or stones.
- Cured properly before tank assembly.
- Reinforced with steel mesh or rebar for strength.
- Advantages:
- Provides uniform support.
- Prevents panel stress and leakage.
- Suitable for all ground types with proper preparation.
- Best For: Most ground-mounted GRP tanks, especially large or full-capacity water storage systems.
✅ 2. Concrete Ring Beam Foundation (for Larger Tanks)
- Description: A circular or rectangular reinforced concrete beam built around the tank perimeter, with a compacted sand or fine gravel bed inside.
- Used When: The tank is large (e.g., >100 m³), and a full slab is not economical.
- Requirements:
- Ring beam supports the tank’s bottom panel edges.
- Internal area filled with compacted sand or fine aggregate for base support.
- Top of the beam must be level.
- Advantages:
- Cost-effective for large tanks.
- Good load distribution.
- Note: Must be designed by an engineer to match tank load and soil conditions.
✅ 3. Steel or Galvanized Support Frame (for Elevated or Rooftop Tanks)
- Description: A structural steel frame that elevates the tank above ground (e.g., on rooftops or for gravity-fed systems).
- Requirements:
- Frame must be securely anchored.
- Designed to handle dynamic and static loads.
- Anti-corrosion treated (galvanized or painted).
- Foundation Below Frame: The steel frame itself sits on concrete pads or columns.
- Best For: Rooftop GRP tanks, fire water storage, or where ground space is limited.
✅ 4. Compacted Gravel/Sand Bed with Concrete Pads (Limited Use)
- Description: A compacted granular base with concrete pads at panel joints or corners.
- Rarely Used: Only for small, temporary, or low-risk applications.
- Risks:
- Uneven settling can cause panel misalignment and leaks.
- Not recommended for permanent installations.
- If Used:
- Must be well-compacted and stabilized.
- Covered with a layer of fine sand for smooth contact.
Inquiry please contact.
Email ✉: cn@chinaestop.cn
Whatsapp✆:+86 15350598856
Web: www.chinaestop.cn
——————————————————————————
“ Wish to be your best partner in China! Welcome to visit our company ”